DOUBLE END STUDS

DOUBLE END STUDS

Double end studs have threads on both ends of the same thread fit class. This is usually class 2A, or if looser tolerances are allowed, commercial nut fit. The body, the area between the threads, may be either equal to the nominal major diameter of the threads or equal to the pitch diameter.

REQUEST A QUOTE

Specifications & Technical Data

Dimensions

Nominal Size Diameter, D Nut End Minimum Full Thread Length, Bmin Umax = 2 Thread Pitches
L ≤ 10 10 < L ≤ 16 L > 16 UNC Threads UNF Threads 8UN Threads
1/4 0.2500 0.750 1.000 1.500 0.100 0.071
5/16 0.3125 0.875 1.125 1.625 0.111 0.083
3/8 0.3750 1.000 1.250 1.750 0.125 0.083
7/16 0.4375 1.125 1.375 1.875 0.143 0.100
1/2 0.5000 1.250 1.500 2.000 0.154 0.100
9/16 0.5625 1.375 1.625 2.125 0.167 0.111
5/8 0.6250 1.500 1.750 2.250 0.182 0.111
3/4 0.7500 1.750 2.000 2.500 0.200 0.125
7/8 0.8750 2.000 2.250 2.750 0.222 0.143
1 1.0000 2.250 2.500 3.000 0.250 0.167
1 1/8 1.1250 2.500 2.750 3.250 0.286 0.167 0.250
1 1/4 1.2500 2.750 3.000 3.500 0.286 0.167 0.250
1 3/8 1.3750 3.000 3.250 3.750 0.333 0.167 0.250
1 1/2 1.5000 3.250 3.500 4.000 0.333 0.167 0.250
1 5/8 1.6250 3.500 3.750 4.250 0.250
1 3/4 0.1750 3.750 4.000 4.500 0.400 0.250
1 7/8 1.8750 4.000 4.250 4.750 0.250
2 2.0000 4.250 4.500 5.000 0.444 0.250
2 1/4 2.2500 4.750 5.000 5.500 0.444 0.250
2 1/2 2.5000 5.250 5.500 6.000 0.500 0.250
2 3/4 2.7500 5.750 6.000 6.500 0.500 0.250
3 3.0000 6.500 7.000 0.500 0.250
3 1/4 3.2500 7.000 7.500 0.500 0.250
3 1/2 3.5000 7.500 8.000 0.500 0.250
3 3/4 3.7500 8.000 8.500 0.500 0.250
4 4.0000 8.500 9.000 0.500 0.250

Double End Studs Specifications

  • STANDARD (ASME/ANSI)
  • METRIC (IFI)
Three Blue Hexagons Are Lined Up On A White Background
Three Blue Hexagons Are Lined Up On A White Background Three Blue Hexagons Are Lined Up On A White Background

Industries We Serve

Nickel Systems provides high quality exotic grade materials that hold up in the toughest, most severe heat and corrosive environments. With our large inventory of specialty fasteners in stock, we are always ready to answer the call to serve the most challenging applications.

Nickel Systems stocks all thread rod in Hastelloy® C276 (Alloy C276), Carpenter® 20 (Alloy 20), Duplex 2205, 316 Stainless and 18-8 Stainless, which can be cut to length and shipped in short order. We can also supply studs to A193 specs (B8, B8C, B8M, B8R, B8S, B8T), Monel® (Alloy 400, Alloy 500), AL6XN®, Nitronic® (50 and 60) and other non ferrous materials.

A Bunch Of Nuts And Bolts On A White Surface

Contact Us Today

Contact Experts for Your High Nickel Alloy Fasteners

Please fill out the form below and a salesman will reach out to you immediately.
Thank you for choosing Nickel Systems!